Features of 15 tons vigorously stamping and creasing machine:
This machine is much more uniform than ordinary hot stamping machines, with strong structural stability, strong force, high precision, independent work, no need for air compressor support in production, and automatic winding of hot stamping aluminum foil. It is suitable for large-area flat embossing, bronzing, embossing, and strong three-dimensional effect. Such as gilding and embossing on leather, acrylic, wood board, paper, etc.
1. Power supply 380v-3-phase total power 8kw
2. Heating plate area mm: 600*600 (customizable), temperature: room temperature - 400 degrees adjustable
3. Bore diameter of 100mm, up and down stroke: (adjustable) 100-200MM (can be customized on demand), pressure: 15T tons adjustable (customizable), hot pressing time (adjustable) 0.2-3 seconds
4. Automatic feeding of hot stamping aluminum foil
5. The speed and the length of roll paper can be adjusted
6. The height of the upper plate and the lower plate is 230mm (can be customized on demand)
Machine size mm: 1200*1000*2000
Packing method: film+plywood
Operation mode: touch screen or button (optional)
Protective device: Infrared safety grating
7. It is suitable for bronzing indentation of wine boxes, photo albums, honorary certificates, etc.
●Sturdy structure, high parallel precision between the movable plate and the work table, four-column precision straight money self-lubricating bearings, high vertical precision; equipped with a photoelectric safety protector,
●It adopts imported low-noise, high-performance oil pump and solenoid valve with long service life;.
●Pressure, stroke, holding pressure, etc. can be adjusted according to the requirements of the pressing process;.
●Comprehensive safety design, two-handed operation, with emergency stop and up and down inching mold adjustment buttons;
●The blanking chute and air blowing device of the working surface can be designed according to the requirements of customers to improve production efficiency;
●The lower heating plate, the upper heating plate tooling screw hole, load cell, sliding workbench, position fine-tuning workbench, etc. are also optional.For large-tonnage hot stamping machines, the lower plate is generally fixed, and the heating head has a lifting stroke of more than 150mm, so the workbench does not need to be pulled in and out
Hot Stamping Rubber Dies/Block/ Engraving Dies
We are the leading name, when it comes to quality range of Hot Stamping Dies and provide the best quality product to our clients. With the assistance of our experienced professionals, we offer quality assured array of Hot Stamping Dies for Printed Pen, Logo, Nail polish bottle, Cosmetic caps, liquor caps, Perfume Bottle caps etc. These are accurately designed in strict conformity with set industrial values of quality and are made available in various stipulations to cater varied needs of customers, under the supervision of experts. In addition to this, we offer these dies to our customers at economical prices.
Bronzing silicone mold
The bronzing silica gel plate transfers the delicate pattern onto the product by using silica gel as a heat carrier. The color is red and brown.
Requirements for silica gel plate: High temperature resistance 350~400°C, hardness requirements can be determined according to customer's printing pattern. General hardness is 40A°, 50A°, 60A°, 70A°, 80A°, 90A°.
Hot stamping silicone version of the use
Mainly used in silicone rubber toys, craft gifts, hardware electronics, product special printing industry, high temperature resistance, thermal transfer new materials, special high temperature resistant products, hot stamping plate, hot stamping silicone roller, thermal transfer, etc.
There are two kinds of hot stamping plates: one is made of silica gel and aluminum plate; the other is without aluminum plate.
Flat font silicone version: can be made according to the customer's artwork, sample, email or film
The graphic template required by the customer, as long as it is before 6 o'clock on the day (designed image file)
Data received before 6 o'clock can be shipped the next day.
Radial Silicone Edition: Our company specializes in solving the problem of customer surface bronzing.
Version, this is a national leader regardless of technology, speed and difficulty. Only the customer
Three-dimensional drawings of products and product adhesive parts can be shipped in the second or third days.
The price of the product is based on the actual sample and the specifications of the image file.
The silicone silica gel produced by the company is made of Japanese imported silica gel, which has good elasticity and high temperature resistance.