LED vacuum exposure machine

TMEP-5060LED vacuum LED exposure machine 

http://v.youku.com/v_show/id_XNjM0NzQ1MDk2.html

 Technical Parameters:

Diazo film exposure times as long as the 380S~600s will be able to meet the requirements

lamp F40W/T10/154 1200MM dia32mm 2500lm

Application & Features:

A low cost and convenient exposure unit for pad stencil exposure. It can be applied for thick steel plate, thin steel plate and photo-polymer plate image, screen frame, etc. The built-in digital timer provides excellent exposure timing control. With vacuum and rubber to ensure well exposure condition. 

1, UV curing lamp in two ways:
(UV mercury lamps) UV curing lamps generally contain mercury wavelengths (250-420) peak 365nm. UVLED curing lamps, light emitting diodes have peak 395,365,385,375.
2, the exposure lamp containing gallium iodide wavelength (350nm-450nm), peak 417nm.
      Application of two light sources are not the same industry, a mercury lamp UV curing UV inks UV glue; exposure lamp is mainly used in the PS plate exposure, non-silver films, diazonium salt film, dry film solder mask, wet film, green solder resist , liquid photosensitive solder resist, screen, film, resin version, PCM diazo film and other photosensitive material exposure.

UV-LED line light exposure machine advantages:
    1, long life: life is more than 10 times that of traditional iodine gallium lamp funnel type exposure machine, about 25,000 to 30,000 hours. 
    2, cold light, no heat radiation, according to the film surface temperature is low, resolved exposure work long-standing problem of heat deformation affects line accuracy. Especially for high precision  film exposure requirements applicable to small temperature rise of the occasion. 
    3, heat a small, solve the gallium lamp heat, staff in clean room unbearable problem. 
    4, instant light, no warm-up instantly reach 100% power UV output. 
    5, from the opening and closing times on long life. 
    6, high energy, light output stable, good illumination uniformity effect.
    7, the effective radiation area size can be customized .
    8, the maximum illumination intensity of up to 6000mw / cm2. 
    9, it does not produce ozone, it is to replace traditional light source technology a safer, more environmentally friendly choice. 
    10, low energy consumption, power consumption is only 10% of the traditional uv lamp type exposure machine can save 90% power.
     11, small size, easy to carry, and only 1/8 the size of traditional  funnel exposure machine.
     12, the maintenance cost is almost zero, using Tamprinter UV-LED equipment annual savings of at least 1,000 $ / SET supplies costs

hot tags:  Squeegee Cutting Machine